Author Topic: Distance to Museum  (Read 5935 times)

Mark Spremulli

  • Museum Member
  • Brakeman
  • ***
  • Posts: 169
  • How Do?
    • View Profile
    • Mark Spremulli Photography
Distance to Museum
« on: June 18, 2009, 07:51:41 PM »
Hello, My name is Mark Spremulli. I have been a member of this board for a while but only as a reader not as a poster. Anyway I am changing this with this post. I do have a question, a friend and I going to be going down to Old Orchard Beach for a three day weekend in September. How far is the museum from Old Orchard Beach and can it fit in to a three day tour?

Thank you very much,
Mark Spremulli
Keep Calm and Get Steamed

Ken Fleming

  • Museum Member
  • Fireman
  • ****
  • Posts: 379
    • View Profile
Re: Distance to Museum
« Reply #1 on: June 18, 2009, 08:16:32 PM »
According to MapQuest, its about 68 miles.  About 1 1/2 hours driving time.  Come on down and ride the WW&F Ry.

Mark Spremulli

  • Museum Member
  • Brakeman
  • ***
  • Posts: 169
  • How Do?
    • View Profile
    • Mark Spremulli Photography
Re: Distance to Museum
« Reply #2 on: June 18, 2009, 09:45:53 PM »
Thanks for the response. I hope to go there, it will be different because the last two times i have been there were for the picnics. I've followed the progress via this website and I would love to see them in person.

Mark Spremulli
Keep Calm and Get Steamed

Bill Piche

  • Museum Member
  • Fireman
  • ****
  • Posts: 398
    • View Profile
Re: Distance to Museum
« Reply #3 on: June 18, 2009, 10:00:08 PM »
Hi Mark,

Don't forget about the MNGRR (or Sandy River and Boothbay for that matter), depending on what weekend you're up, Monson #4 will be out (MNG is running her alot this fall for the cruise ships). As far as I know, #4 will be out for Labor Day Weekend (Sat, Sun, Mon). After that, Sept 12 (Sat), 19 (Sat), 20(Sun), 26 (Sat), and 27(Sun).
(WW&F guys, please forgive my shameless plug.)
Engineer/Fireman, MNGRR/WW&F/Essex
"Any day with steam is a good day." - me

John McNamara

  • Operating Volunteers
  • Supervisor
  • ******
  • Posts: 1,628
    • View Profile
Re: Distance to Museum
« Reply #4 on: June 18, 2009, 11:26:58 PM »
(WW&F guys, please forgive my shameless plug.)

Bill,
No problem. One of the great things about visiting Maine is that there are so many great museums for the two-foot fan to visit. Here's a somewhat long-winded piece that I wrote for prospective visitors. My apologies to the moderators for mixing several railroads together, but that's the point - get a good two-foot fix in a day or two!

-John

VISITING THE MAINE TWO-FOOTERS
The following directions assume that you have a car. If you do not, rental cars are available at the Portland Jetport, reachable by plane (obviously) or by city bus or taxi from the Portland Transportation Center, the arrival point of intercity busses and Amtrak’s Downeaster.

The Maine Narrow Gauge Railroad Company & Museum
Take I-95 (Maine Turnpike) to exit 44 (formerly 6A), I-295. Once on I-295 through downtown Portland, take exit 7 (“Franklin Street Arterial”), which becomes Franklin Street. From the first traffic light, go straight on Franklin Street 8/10ths of a mile. Turn left on Fore Street. Go 1/10th of a mile to a four-way stop. Staying on Fore Street, go 2/10ths of a mile to 58 Fore Street; the railroad and museum are on the right. Drive through the complex of brick buildings, and park on the water side of the buildings.

The Wiscasset, Waterville & Farmington Railway Museum
Take I-95 (Maine Turnpike) to exit 44 (formerly 6A), I-295. [If you are at the Maine Narrow Gauge Museum, return to I-295 North.] Continue on I-295 through downtown Portland. Get off at exit 28 (formerly 22) for Route 1, Brunswick and Bath. Take Route 1 north through Brunswick and Bath to Wiscasset. At the Post Office (halfway down the hill from the Courthouse) take a left onto Route 218. Once you are on 218, go north 4.7 miles from Route 1 to a four-way intersection. At the four-way intersection, go left onto the Cross Road. The museum is 1/10th mile from this intersection, at the bottom of a slight hill.

Boothbay Railway Village
Follow the above WW&F directions to reach Wiscasset. [If you are at the WW&F, return to downtown Wiscasset.] Continue on Route 1 North through Wiscasset and over a long bridge. About 1.5 miles from the beginning of this bridge, take a right onto Route 27. The Boothbay Railway Village is on Route 27 eight miles south of this intersection.

Sandy River and Rangeley Lakes Railroad
Directions from the Portland area:
Follow the Maine Turnpike North to Exit 75 (formerly 12) in Auburn. From this exit, take Rte. 4 North all the way to Phillips. Phillips is about 70 miles from the turnpike exit. You will pass through Auburn/Lewiston, Turner, Livermore, Livermore Falls, Jay, Wilton, Farmington, and the edge of Strong on your way. As you pass through Avon, watch for the grass runway of the Raymond Airport on your left. Take the next right turn onto Pleasant Street. If you take no further turns, you will cross the Sandy River on a concrete bridge and head up the hill on Bridge Street. After you come down the other side of the hill, the SR&RL Sanders Station is on your left. The driving time from Exit 75 to Phillips should be about 90 minutes staying within the speed limits.

If you are at the WW&F or Boothbay, return to downtown Wiscasset, go back south on Route 1 a few hundred feet to Route 27 North and take that to Augusta. From Augusta, take Route 27 North to Farmington, about 37 miles. At Farmington, take Route 4 North to Phillips, about 18 miles. As you pass through Avon, watch for the grass runway of the Raymond Airport on your left. Continue with directions above. Driving time from Augusta should be about 75 minutes.


Ed Lecuyer

  • Administrator
  • Superintendent
  • *****
  • Posts: 4,626
    • View Profile
    • wwfry.org
Re: Distance to Museum
« Reply #5 on: June 19, 2009, 07:42:24 AM »
Not only does the moderator "not mind" such posts - I actively encourage them. With cooperation between the four 2ft museums in Maine, great things can be accomplished.

John, I took your post and made a "sticky" out of it - so that all may enjoy it for future reference.
Ed Lecuyer
Moderator, WW&F Forum