WW&F Railway Museum Discussion > Work and Events

WW&F No. 53 - Official Work Thread

(1/13) > >>

Ed Lecuyer:
Observant members and visitors to Sheepscot recently may have noticed a section of standard gauge track under construction. Or perhaps their curiosity was piqued by a recent "April Fools" posting on social media. They may have wondered what’s going on. The WW&F is, after all, a two-foot gauge railway.

Here’s the rest of the story. For the better part of three years, we have been looking for just the right diesel locomotive to supplement our trusty No. 52. We needed something to plow snow, pull work trains, handle trains on the Mountain Extension, and (perish the thought) rescue a stalled steam train.

We spent a lot of time seeking a suitable locomotive. We wanted a double-truck unit that would not punish our track. We wanted something with plenty of power to do what we needed. We thought there might be a chance for an Australian sugar cane locomotive, but all that was available was an 0-6-0 diesel hydraulic not much larger than No. 52. We looked into British and French units, and we even looked into eastern European diesel hydraulics, but nothing quite fit.

We thought maybe we could salvage the remains of a wrecked GE and rebuild it. We considered building our own from the ground up. We even considered a commercial rebuild and a battery-electric. But in the end, nothing seemed quite right.

After considerable thought and consultation, we finally decided to seek a small standard gauge locomotive that could economically be modified to meet our needs, and in mid-February, we found a 1941 General Electric 45-ton side-rod diesel in Sunbury, Pa. that seemed to meet our criteria, which we were able to purchase at scrap price.

Over the last several weeks since we purchased the locomotive, the engineering of the conversion was taken in hand, with a thorough plan already laid out. This is going to be an interesting and exciting project, and If you like to volunteer, contact Jason Lamontagne at the museum.

That’s what the standard gauge track is for. No. 53 will arrive at Sheepscot by truck in May and will be unloaded onto the new track now under construction. Over the next year or three, the trucks will be overhauled and rebuilt to two-foot gauge, a new propulsion system utilizing one of its two diesel engines and traction motors will be installed, snowplow pilots will be fabricated for both ends, and most significantly, the entire locomotive including the cab will be reduced in width to fit our clearances, and its weight will be reduced by about 10 tons. And who knows, it may eventually even have an alternative battery propulsion system.

Bill Baskerville:
Note the new updated power, to become No 53, for the re-gauged WW&F. Notice how Mike replicated the new tie spacing to reduce track expenses for the expanded railroad into Canada. Also, as a bone to the traditionalist the new standard gauge power retains the driving rods in a nod to the smoky, smelly dirty steamers of old.   

Mike the Choochoo Nix:
Ah! Outside frame trucks, can be narrowed easier than conventional ones I would think.

Jeff Schumaker:
I wondered if this was the diesel the museum was getting, after Wayne and I had exchanged several emails.

Jeff S.

Ted Miles:
When the #53 is delivered later this month; please look up and post the GE Construction Number.
Also what kind of Diesels are in them unit. I beelieve someone re-powered it during its long career.
I would like to keep my WW&F roster up to date, with as much information as possible.

Now that it is here; I remember a thread a couple of years ago, discussing Russian, South African or Australian locomotives. With an American product there will not be the need for purchasing a lot of Metric tooling to work on the conversion!

Ted Miles, WW&F Member, narrow gauge fan


[0] Message Index

[#] Next page

Go to full version