Author Topic: Specifications needed  (Read 2088 times)

Robert Hale

  • Hostler
  • ***
  • Posts: 211
    • View Profile
Specifications needed
« on: January 25, 2017, 02:51:22 PM »
Hey all,
I need some measurements from some of the equipment in the museum. I'm asking here since I don't know anyone personally at the museum to email. Here is what I need:

Median coupler height off the rail
Maximum axle loading for the entire line (for locomotives)
Maximum width of equipment (locomotive)
3/4 scale coupler dimensions for mounting in a locomotive frame
Minimum clearance for under-chassis


Also, would propane/gasoline fuel (dual fuel) be acceptable for fuel for a locomotive to be used on the line?

Rob
 

Jason M Lamontagne

  • Operating Volunteers
  • Supervisor
  • ******
  • Posts: 1,567
    • View Profile
Re: Specifications needed
« Reply #1 on: January 25, 2017, 04:55:23 PM »
Hi Rob,

Look for a response via private message shortly.

Thanks,
Jason