W.W.&F. Discussion Forum

WW&F Railway Museum Discussion => Museum Discussion => Topic started by: Robert Hale on January 25, 2017, 02:51:22 PM

Title: Specifications needed
Post by: Robert Hale on January 25, 2017, 02:51:22 PM
Hey all,
I need some measurements from some of the equipment in the museum. I'm asking here since I don't know anyone personally at the museum to email. Here is what I need:

Median coupler height off the rail
Maximum axle loading for the entire line (for locomotives)
Maximum width of equipment (locomotive)
3/4 scale coupler dimensions for mounting in a locomotive frame
Minimum clearance for under-chassis


Also, would propane/gasoline fuel (dual fuel) be acceptable for fuel for a locomotive to be used on the line?

Rob
 
Title: Re: Specifications needed
Post by: Jason M Lamontagne on January 25, 2017, 04:55:23 PM
Hi Rob,

Look for a response via private message shortly.

Thanks,
Jason